YP27 Single-action plate stretching hydraulic press
YP27 Single-action plate stretching hydraulic press
Single-action Plate Strectching
Model:YP27
Options

Safety Light Curtain, Limit Sensor, Lower Lead Point Locating Device, Oil Temperate Cooling Device, Die Change Trolley, Die/Try-out Press, Front/Rear/Left/Right Moving Bolster, Upper Table 90º/180º/Front/Rear/Left/Right Roll-over, Mould Heating & Cooling System etc.

Product Introduction
Characteristics:
1. Computer optimized design, four-post structure is simple, economical and practical; frame structure rigidity, high precision anti-side load capability.
2. Hydraulic control with cartridge-based systems, reliability, long life, small hydraulic impact, reducing the connecting pipe and the leak point.
3. PLC control of the electrical system compact, sensitive, reliable, flexible.
4. With the adjustment, his hands a single cycle (with feeding device) continuous three operating mode.
5. Choose the control panel, not only to achieve certain extent, two kinds of constant pressure forming process, and can achieve a pad, no pad, the top three kinds of craft work cycle.
Application:
Sretching, bending, forming, blanking, flanging and stamping process, especially for the following areas:
1. Automotive parts: body panels, brake pads, fuel tank, chassis, axle, bumper etc.
2. Husehold appliances: washing machine parts, rice cooker parts, TV parts, refrigerator parts, etc.
3. Ktchen: sink, pot with stainless steel appliances, a variety of other containers.
4. Other: tractors, motorcycles, aerospace, aviation etc.

Pressing Dagram:

Technical Parameters:

Type Unit   100 160 200 315 500 630
Nominal force KN   1000 1600 2000 3150 5000 6300
Cushion pressure KN   250 400 400 630 1000 1600
Maximum opening mm A 800 1000 1120 1250 1500 1500
Maximum slider stroke mm B 500 700 710 800 900 900
Cushion stroke mm C 200 250 250 300 300 300
The best moving out stroke of the table mm D         ≥1400 ≥1600
Slider speed down Mm/s   100 100 150 150 200 200
working Mm/s   7~10 7~12 7~10 7~12 8~12 8~12
return Mm/s   65 65 65 65 80 100
Working table size L-R mm E 715 1000 1200 1200 2000 2500
F-B mm F 580 800 1000 1200 1400 1600
Cushion size L-R mm D 410 600 700 800 1500 1800
F-B mm H 300 400 500 800 900 1000
Machine size L-R mm I 2420 2700 3230 3400 4380 5040
F-B mm J 900 1600 1800 2000 3000 3600
height mm K 3420 3800 4200 4530 4980 5800
Motor power KW   7.5 11 15 22 37 44
Type Unit   800 1000 1250 1600 2000 2500 3000
Nominal force KN   8000 10000 12500 16000 20000 25000 30000
Cushion pressure KN   3000 3500 4000 400 630 8000 8000
Maximum opening mm A 1600 2000 2000 2000 2000 2200 2200
Maximum slider stroke mm B 1100 1000 1200

1200

1200

1200

1200

Cushion stroke mm C 300 350 400 500 500 500 500
The best moving out stroke of the table mm D ≥2200 ≥2200 ≥2000 ≥2200 ≥2200 ≥2200 ≥2200
Slider speed down Mm/s   250 250 250 250 250 250 250
working Mm/s   8~15 8~15 8~15 8~15 7~12 7~12 7~12
return Mm/s   100 100 100 100 80 80 80
Working table size L-R mm E 2800 3200 3500 3500 3500 3500 3600
F-B mm F 2000

2200

2200 2200 2500 2800 2800
Cushion size L-R mm G 2150 2150 2750 2750 2750 2750 2750
F-B mm H 1400 1550 1550 1550 1550 1800 1800
Machine size L-R mm I 5500 6100 6580 6800      
F-B mm J 4400 4800 4800 4800      
height mm K 7000

8000

9200 9800      
Motor power KW   48 67 74 115 150 200 250