YP35 H-frame hydraulic press
YP35 H-frame hydraulic press
Pengd H Frame Hydraulic Press
Model:YP35
Options

Proportional Regulation for Slider Speed, Front/Rear/Left/Right Moving Bolster,Light Curtain Safety, Protect Iron/Glass Fencing, Oil Heating/Cooling Device, Die Protection Unit, Displacement Sensor, Die Exchange Cart, Quick Die Clamping, Slider Upper Locking Device etc.

Product Introduction
Characteristics:
1. Frame column structure, load and unload conveniently.
2. Cartridge valve control, stable, high efficiency and long life time.
3. Extension with the hydraulic cylinder on workingtable, high accuracy and reliable.
4. High efficiency of cooling device, sutable for continuous production
Application:
Pressing large and middle moto, rotor and stator; pressing and forming startor silicon steel sheet; drawing and forming the large workpiece etc.

Technical Parameters:

Type Unit   63T 100T 160T 200T 315T
Nominal force KN   630 1000 1600 2000 3150
Maximum working pressure of the fluid MPa   24.7 26.3 26 25 25
Maximum stroke of the cylinder mm B 500 600 800 800 1000
Pressure head down speed Mm/s   23 16 24 19 15
Pressure head return speed Mm/s   77 48 93 43 55
Motor power KW   5.5 5.5 11 11 15
Maximum opening from pressure head to the table mm A 1400 1600 1800 2200 2400
The best moving out stroke of the table mm H 550 600 700 800 900
Table size L-R mm C 800 850 950 1000 1000
F-B mm D 500 600 850 1000 1000
Distance between left and right mm E 900 1100 1150 1200 1200
Total height mm F 2480 2688 3000 3200 3300
Body width mm I 3200 3800 4100 4500 4700
Deep of the machine pit mm G 600 600 734 734 850