YPT41 Desktop C-frame hydraulic press
YPT41 Desktop C-frame hydraulic press
Pengda Desktop C Frame Hydraulic Press
Model:YPT41
Options

Square Preesure Head, 1/2/4 pcs Pull Rod, Safety Light Curtain, Protect Iron/Glass Fencing, Limit Sensor, Lower Lead Point Locating Device, Oil Temperate Cooling Device, Die Change Trolley, Die/Try-out Press, Cooling System, Working Area Lighting etc.

Product Introduction
Characteristics:
1. Computer optimized design of vertical C-type structure, good rigidity.
2. Machines are installed in various parts of the body, the appearance tidy.
3. Hydraulic system with manual valve, speed convenient.
4. Hand and foot with two modes of operation.
5. Machine stroke, the pressure can be adjusted within the specified range.
Application:
This series of press for shaft parts, profiles and other calibration techniques, shaft, sleeve press-fit parts and sheet metal parts of simple stretching, bending, stamping, forming, blanking and other technology can also be a general powder, plastic repression.

Technical Parameters:

Type unit 0.63T 1T 1.6T 2.5T
Nominal force KN 6.3 10 16 25
Maximum working pressure of the fluid Mpa 2.7 4.2 5.1 5
Maximum opening mm 300 300 300 390
Maximum stroke of the slider mm 120 120 160 160
Slider speed down Mm/s 58 58 44 47
return Mm/s 83 83 90 77
Throat depth mm 100 100 160 160
Table size L-R mm 250 250 250 360
F-B mm 300 300 300 320
Working table height mm Desktop type
Motor power KW 1.5 1.5 1.5 2.2
Machine size L-R mm 480 480 480 540
F-B mm 630 630 670 770
height mm 1140 1140 1160 1340