YP61 Extruding machine
YP61 Extruding machine
Pengda Extrusion Hydraulic Press
Model:YP61
Options

Safety Light Curtain, Limit Sensor, Lower Lead Point Locating Device, Oil Temperate Cooling Device, Die Change Trolley, Die/Try-out Press, Front/Rear/Left/Right Moving Bolster, Upper Table 90º/180º/Front/Rear/Left/Right Roll-over, Mould Heating & Cooling System etc.

Product Introduction
Characteristics:
1. Frame structure is very rigidiy and stable.
2. Cartridge valve control, stable, high efficiency and long life time.
3. Independent electrical control system, reliable, accurate and easy maintenance.
4. Concentrated control button, adjustmnt and automatic operation.
Application:
Metal parts extrusion molding, especial for motocycle, car and light field etc.

Technical Parameters:

Type Unit 100T 160T 200T 315T 400T 500T
Nominal force KN 1000 1600 2000 3150 4000 500
Maximum working pressure of the fluid Mpa 25 25 25 25 25 25
Return force of the main cylinder KN 250 350 400 630 630 800
Eject force KN 250 400 400 630 630 1000
Maximum opening mm 800 1000 1100 1250 1400 1500
Slider stroke mm 500 500 700 800 800 900
Eject stroke mm 200 200 200 250 250 300
Slider speed Fast down Mm/s 100 150 150 200 200 200
Working Mm/s 8-19 10-25 10-25 10-25 10-25 10-25
return Mm/s 80 80 80 100 100 100
Eject speed eject Mm/s 80 80 80 60 60 60
return Mm/s 120 120 120 100 100 100
Table size L-R mm 710 900 900 900 1000 1000
F-B mm 580 900 900 900 1000 1000
Motor power KW 7.5 15 22 22 37 45
Type Unit 630T 800T 1000T 1200T 1600T 2000T
Nominal force KN 6300 8000 10000 12000 16000 20000
Maximum working pressure of the fluid Mpa 25 25 25 25 25 25
Return force of the main cylinder KN 1200 1600 2000 2000 3000 4000
Eject force KN 1000 1200 2000 2000 2000 3000
Maximum opening mm 1500 1600 1600 1600 1800 1800
Slider stroke mm 900 1000 1000 1000 1200 1200
Eject stroke mm 300 300 350 350 400 400
Slider speed Fast down Mm/s 200 200 250 250 250 250
Working Mm/s 10-25 10-25 10-25 10-25 10-25 10-25
return Mm/s 100 100 100 120 120 120
Eject speed eject Mm/s 80 80 80 80 80 80
return Mm/s 120 120 120 120 120 120
Table size L-R mm 1000 1000 1200 1200 1400 1500
F-B mm 1000 1000 1200 1200 1400 1500
Motor power KW 60 90 110 120 150 200