YP41 C-frame hydraulic press
YP41 C-frame hydraulic press
Pengda C Frame Hydraulic Press
Model: YP41
Options

Square Preesure Head, 1/2/4 pcs Pull Rod, Safety Light Curtain, Protect Iron/Glass Fencing, Limit Sensor, Lower Lead Point Locating Device, Oil Temperate Cooling Device, Die Change Trolley, Cooling System, Working Area Lighting etc.

Product Introduction
Characteristics:
1. C Frame high strength structure design with three sides open for easy material loading and product unloading as well as easy connecting with other corollary equipment.
2. Attractive and neat appearance, with driving system inside the fame.
3. Manual directional control valve is adopted in hydraulic system for easy speed regulation.
4. Adjust steplessly, high repeat precision of pressure distance
4. Handle operation or pedal operation at operator’s choice.
5. Stroke and pressure can be adusted within specificed scope.
Application:
Straightening process for shaft parts and profiled bar; press-in process for shaft and sleeve parts; drawing, benidng, coining, forming and stamping processes for sheet parts; forming process for powder and plastic prodcts, etc.

Technical Parameters:

Type unit   2.5T 4T 6.3T 10T 16T 25T
Nominal force KN   25 40 63 100 160 250
Maximum working pressure of the fluid MPa   5 7.9 5.1 8.1 13 20.3
Maximum opening mm A 300 400 450 510 550 600
Maximum stroke of the slider mm B 160 200 300 300 350 350
Slider speed down Mm/s   47 47 48 48 48 48
return Mm/s   77 77 81 81 100 100
Throat depth mm C 160 180 250 250 280 280
Working table size L-R mm D 480 480 550 550 650 650
F-B mm E 320 320 480 480 500 500
Working table height mm F 700 710 700 710 710 710
Cutting hole diameter mm   70 70 80 80 100 100
Motor power KW   2.2 2.2 3 4 5.5 5.5
Machine size L-R mm G 565 585 620 680 730 755
F-B mm H 810 870 1080 1100 1300 1380
height mm I 1565 1610 1860 1950 2050 2100
Type unit   40T 63T 100T 160T 200T 250T 315T
Nominal force KN   400 630 1000 1600 2000 2500 3150
Maximum working pressure of the fluid MPa   22.6 24.7 26.3 26 25 26 25
Maximum opening mm A 700 800 800 900 900 900 900
Maximum stroke of the slider mm B 400 500 500 500 500 500 500
Slider speed down Mm/s   33 37 40 24 19 20 15
return Mm/s   73 72 120 93 80 76 55
Throat depth mm C 320 350 350 380 380 380 400
Working table size L-R mm D 700 800 800 900 900 900 900
F-B mm E 550 600 600 600 700 700 700
Working table height mm F 700 730 730 750 750 800 850
Cutting hole diameter mm   100 120 120 120 120 120 120
Motor power KW   5.5 7.5 11 11 11 15 15
Machine size L-R mm G 800 850 875 1000 1000 1000 1000
F-B mm H 1400 1570 1655 1630 1630 1630 1630